Skip to content
Licensed mold remediation — call to schedule
ES
MoldAct logo MoldAct IICRC S520 Certified Mold Remediation
Mold remediation in Foggy Bottom, DC Photo placeholder

Mold Inspection & Remediation in Foggy Bottom

MoldAct provides IICRC S520-certified mold inspection, testing, and remediation across Foggy Bottom, DC. We know the local buildings and the mold conditions that come with them.

Call (877) 660-0430 Free Inspection

Get Your Free Mold Inspection

Or call now: (877) 660-0430

Mold remediation built for Foggy Bottom

Foggy Bottom takes its name from the low-lying, once-marshy ground along the Potomac that historically trapped fog and industrial smoke — if you're here, that same low, damp terrain means groundwater and foundation moisture have always been more persistent for you than for DC's higher-elevation neighbourhoods.

If your rowhouse sits next to one of the big institutions here — GWU, the State Department, the World Bank — their large centralised HVAC systems can develop condensate or drain-pan failures that spread moisture into your adjacent party wall, even though the fault is entirely on their side of it.

If you rent a basement or ground-floor unit near GWU, know that dense student turnover means moisture issues here often go unreported for a full leasing cycle before anyone who can act on it actually hears about it.

Common mold types in Foggy Bottom

  • Cladosporium (low-lying, historically marshy ground and its effect on foundation moisture)
  • Penicillium/Aspergillus (institutional HVAC systems adjacent to residential party walls)
  • Stachybotrys chartarum (student-rental units with delayed leak reporting)
  • Chaetomium (older rowhouse basements with chronic groundwater proximity)

We serve George Washington University, Kennedy Center, U.S. Department of State, World Bank, Rock Creek Trail and the wider Foggy Bottom area across ZIP codes 20037.

Services

Mold Remediation Services in Foggy Bottom

Tap a service for Foggy Bottom-specific details.

Certified technician conducting a mold inspection with moisture-mapping equipment inside a home

Mold Inspection

A professional mold inspection identifies the type, extent, and moisture source driving mold growth through visual survey, moisture mapping, and air or surface sampling by a licensed mold assessor — with a written remediation protocol included.

Learn more
Technician in full protective suit and respirator removing mold-damaged material during a remediation job

Mold Remediation

IICRC S520-certified mold remediation includes source moisture control, physical containment, HEPA-vacuuming and removal of affected porous materials, antifungal treatment of structural surfaces, and independent clearance testing — never by the same company that performed the remediation.

Learn more
Crew in hazmat suits sanitizing a surface affected by black mold growth

Black Mold Removal

Black mold (Stachybotrys chartarum) removal requires a full IICRC S520 Level III protocol — independent assessment, negative-pressure containment, physical removal of all contaminated porous materials, P100 respirator protection, and independent clearance testing. Bleach or encapsulant spray is not remediation.

Learn more
Indoor air quality technician collecting a mold air sample with a spore trap device

Mold Testing & Air Quality

Professional mold testing includes paired indoor/outdoor air cassette sampling, surface samples for Stachybotrys and Chaetomium, analysis at an AIHA-accredited laboratory, and a written report with species identification, spore counts, and interpretation — distinguishing elevated indoor levels from normal background.

Learn more
Structural drying equipment and air movers set up to dry out a water-damaged room

Water Damage Restoration

Water damage restoration follows the IICRC S500 standard: Category 1/2/3 water classification, immediate extraction, structural drying with dehumidifiers and air movers within 24 hours, daily moisture monitoring, and mold prevention through achieving IICRC drying goals before reconstruction begins.

Learn more
Technician performing mold remediation work in a residential basement

Basement Mold Removal

Basement mold removal requires identifying and permanently correcting the moisture source — foundation seepage, sump failure, or condensation — before remediation of affected framing and drywall, followed by encapsulation of the crawl-space or basement slab if chronically damp.

Learn more
Extensive mold growth on wooden joists and insulation inside a home's crawl space

Crawl Space Mold Remediation

Crawl space mold is driven by ground moisture vapour and inadequate ventilation — remediation includes IICRC S520 treatment of floor joists and subfloor framing, followed by ground vapour barrier installation and ventilation correction to prevent recurrence.

Learn more
Mold growth spreading across attic roof sheathing and rafters

Attic Mold Removal

Attic mold grows on roof sheathing and rafters when inadequate ventilation traps moisture from bathroom exhaust fans, kitchen vents, or ice dam leaks — remediation treats the wood surfaces and corrects the ventilation deficiency or moisture source to prevent recurrence.

Learn more
Mold growth along bathroom tile and grout caused by excess moisture and poor ventilation

Bathroom Mold Removal

Bathroom mold may be surface growth (Cladosporium on grout or caulk, treatable with professional cleaning) or structural (mold behind drywall or subfloor from chronic moisture), which requires IICRC S520 protocol remediation — a professional assessment determines which applies.

Learn more
Mold buildup inside an aged HVAC unit's ductwork and components

HVAC Mold Cleaning

HVAC mold requires specialist remediation — not routine duct cleaning — including assessment and treatment of the air handler coil and drain pan, duct interior surfaces, and post-remediation air sampling to confirm clearance before the system is operated again.

Learn more
Common moisture and mold conditions found in an unencapsulated crawl space

Crawl Space Encapsulation

Crawl space encapsulation installs a reinforced 20-mil polyethylene vapour barrier over the floor and lower walls, sealed at all seams and foundation penetrations, to permanently control ground moisture and prevent future mold growth — the definitive solution for chronically damp crawl spaces.

Learn more
Mold remediation crew completing final work ahead of post-remediation clearance testing

Post-Remediation Clearance Testing

Post-remediation clearance testing must be performed by an independent licensed mold assessor — not the remediator — with air samples collected while containment is still in place, an outdoor control sample taken simultaneously, and results confirming the remediated area has returned to Condition 1 (normal) spore levels before containment is removed.

Learn more

Mold Remediation in Foggy Bottom — FAQs

How soon can you come out in Foggy Bottom?

Call us and we'll book the earliest available appointment across Foggy Bottom (20037), DC. We offer 48-hour response for water damage and active mold emergencies.

What mold types are most common in Foggy Bottom?

In Foggy Bottom, the most commonly identified mold types are: Cladosporium (low-lying, historically marshy ground and its effect on foundation moisture); Penicillium/Aspergillus (institutional HVAC systems adjacent to residential party walls); Stachybotrys chartarum (student-rental units with delayed leak reporting); Chaetomium (older rowhouse basements with chronic groundwater proximity).

Are you licensed and insured?

Yes. MoldAct works exclusively with licensed and insured mold remediation contractors who follow the IICRC S520 standard.

Mold problem in Foggy Bottom? Call today.

Licensed, insured mold remediation contractors. Call to schedule.

Call (877) 660-0430 Free Inspection
Call Now Free Quote