Skip to content
Licensed mold remediation — call to schedule
ES
MoldAct logo MoldAct IICRC S520 Certified Mold Remediation
Mold remediation crew completing final work ahead of post-remediation clearance testing

Post-Remediation Clearance Testing in Edison, NJ

Post-remediation clearance testing must be performed by an independent licensed mold assessor — not the remediator — with air samples collected while containment is still in place, an outdoor control sample taken simultaneously, and results confirming the remediated area has returned to Condition 1 (normal) spore levels before containment is removed.

Call (877) 660-0430 Free Inspection

Get Your Free Mold Inspection

Or call now: (877) 660-0430

Clearance testing in Edison: what to know

Edison's post-war subdivision housing (1950s–1970s Cape Cods and split-levels) has crawl spaces with original 4-mil vapour barriers that have degraded over decades — crawl-space mold is extremely common in this housing vintage.

The Raritan River watershed portions of Edison have experienced repeated flooding during nor'easter storms — basement flooding and subsequent mold are recurring issues in low-lying sections.

Mold conditions in Edison

Common mold types in this area: Cladosporium (crawl space framing); Aspergillus/Penicillium (basement insulation and subfloor); Stachybotrys (chronic groundwater infiltration).

We serve Edison Memorial Tower, Menlo Park Mall, Roosevelt Park, Raritan Center Parkway and the wider Edison area across ZIP codes 08817, 08818, 08820, 08837.

Signs you need clearance testing

  • Remediation has been completed and containment is still in place
  • The written protocol specifies clearance testing as a completion requirement
  • A real estate transaction requires documented proof of successful remediation
  • An insurance claim requires certified clearance documentation
  • The remediator has offered to perform their own clearance (this should be declined)
  • A previous clearance test failed and re-clearance is required after additional work

How we handle clearance testing in Edison

Clearance testing is the final step of any IICRC S520-compliant mold remediation and the critical quality control measure that confirms the work was done correctly. The clearance test must be performed by an independent licensed mold assessor — the company or individual that performed the remediation cannot perform their own clearance test. This independence is mandated by the NYS 2015 Mold Law and is best practice in all markets.

The timing and conditions of clearance testing are specified in the written remediation protocol. Standard protocol requires that containment remains fully in place when samples are collected, that the HEPA-filtered negative air machine has been running for at least 4 hours before sampling, and that an outdoor control sample is collected simultaneously with indoor samples.

Simple, transparent process

Our Edison Post-Remediation Clearance Testing Process

  1. 1

    Protocol review

    The independent assessor reviews the written remediation protocol to understand the scope, clearance criteria, and required sample locations before arriving on site.

  2. 2

    Site verification

    The assessor confirms that containment is intact, the HEPA negative air machine has been running, and the remediation work has been completed as specified in the protocol before any samples are collected.

  3. 3

    Air sample collection

    Air cassette samples are collected simultaneously inside the cleared area and outside the building. The outdoor sample is the control — it establishes the ambient background spore count for comparison. Additional samples may be specified in areas adjacent to the remediated zone.

  4. 4

    Laboratory analysis

    Samples are chain-of-custody shipped to an AIHA-accredited laboratory. Standard turnaround is 24–48 hours; rush service is available when the remediation crew is standing by and reconstruction is time-sensitive.

  5. 5

    Clearance report

    The licensed assessor issues a written clearance report with laboratory results, interpretation, and a pass/fail determination against the protocol clearance criteria. A passing clearance report authorises the remediator to remove containment and authorises reconstruction to begin.

Post-Remediation Clearance Testing in Edison — FAQs

Do you provide clearance testing in Edison?

Yes — MoldAct provides clearance testing throughout Edison, NJ (ZIP codes: 08817, 08818, 08820, 08837) and surrounding New Jersey areas. Call us to book the earliest available appointment.

Can the mold remediator do their own clearance test?

No — under the NYS 2015 Mold Law, the assessor and remediator must be separately licensed and cannot be the same company. Even in markets without this legal requirement, using the same company for remediation and clearance is a conflict of interest. Independent clearance is the industry standard.

What happens if the clearance test fails?

A failed clearance test means the remediation did not meet the protocol's clearance criteria. The remediator is responsible for additional work (additional HEPA cleaning, material removal, or extended containment) at no additional cost in most contracts. After the additional work, another independent clearance test is performed.

How long does clearance testing take?

The site visit takes 30–60 minutes. Laboratory turnaround is typically 24–48 hours for standard service or same-day/next-day for rush. The full clearance report with written interpretation is issued within 24 hours of receiving lab results.

Is a clearance report required for a home sale?

It is not universally required by law but is typically required by buyers, their lenders, and real estate attorneys in transactions where mold remediation has been performed. A dated, signed clearance report from a licensed independent assessor is the standard documentation.

Post-Remediation Clearance Testing in Edison — book today

Licensed, insured mold remediation contractors. Call to schedule.

Call (877) 660-0430 Free Inspection
Call Now Free Quote